BUG & TAR REMOVER

Removes traces of bitumen, tar, and insect traces
BUG & TAR REMOVER
It is used to remove tar, bitumen, and insect traces from car parts protected by paint and varnish coating.

The product has a high cleaning ability, easily removes both fresh and old stains.

Method of application

1
Shake the container before use
2
Apply the product in a thick layer on a dry, dirty surface
3
Wait 20-30 seconds
4
Wipe off the soluble dirt with a soft rag, you can moisten the soft rag with the product
5
Remove the dirt. Rinse thoroughly with water
6
Repeat the procedure for hard-to-remove stains
Attention: Flammable!

Safety precautions: Do not use near an open flame. Do not pierce or burn the cylinder. Keep away from direct sunlight. Do not heat above 122 °F. Use with sufficient ventilation. Avoid prolonged inhalation of vapors. In case of contact with skin, rinse with soap and water. In case of contact with eyes, rinse with plenty of water, then consult a doctor. Use as intended. It is not recommended to apply on glass and work as a cleaner in the sun. Do not turn over when spraying. It is forbidden to apply on glass, headlights, mirrors, plastic surfaces without paint coating and chrome products.
    Volume
    Box size
    Quantity in a box
    15,21 fl oz
    15.75x10.43x8.46 inch
    24 pc
    PACKING SIZE