MASS AIR FLOW SENSOR CLEANER

For petrol and diesel engines
MASS AIR FLOW SENSOR CLEANER
Most fuel-injected vehicles are equipped with a mass air flow sensor (MAF), which affects the characteristics of the air-fuel mixture and the correct operation of the engine. During operation, the sensor element is covered with a layer of soot and dust, oil and air filter fibers. This reduces the accuracy of the measurement, which leads to incorrect engine operation, loss of power, and increased fuel consumption.
safely cleans the sensor element
normalizes idle speed
restores the factory fuel consumption parameters
dries quickly, without leaving any traces
suitable for all kinds of sensors

Method of application

1
Remove the air filter. Disconnect the electrical connector and remove the mass flow sensor
2
From a distance of 10-15 cm, spray the compound liberally on the sensor element of the mass air flow sensor and on the walls inside its housing. Do not touch the sensor with your hands or with a tool
3
If necessary, repeat the treatment after drying the sensor.
Attention: Flammable!

Safety precautions: Do not use near an open flame. Do not pierce or burn the cylinder. Keep away from direct sunlight. Do not heat above 122 °F. Use with sufficient ventilation. Avoid prolonged inhalation of vapors. In case of contact with skin, rinse with soap and water. In case of contact with eyes, rinse with plenty of water, then consult a doctor. Use as intended. Do not turn over when spraying. Keep out of reach of children.
    Volume
    Box size
    Quantity in a box
    15,21 fl oz
    15.75x10.43x8.46 inch
    24 pc
    PACKING SIZE
    Volume
    Box size
    Quantity in a box
    6,75 fl oz
    12.6x8.66x6.89 inch
    24 pc
    PACKING SIZE